Craft Nook: The Whole Shebang!

I was gonna do a post on how I designed and installed shelves in my craft nook all by my lonesome, but, really, who wants to see all the details? I used some wood. I painted it. I used a level and other impressive-sounding tools to install them. It took for-e-ver, and now it's done and I love it. The end. Wanna see?

Click on the links for details on how to make the storage containers, decoupaged boxes, pallet desk, crib chalkboard easel, and crib springs bulletin board.

The kicker? The whole shebang only cost $122!!

Shelves:
   Corbels                      $ 34
   1x2" Support wood   $ 19
   1x12" shelf                $  9
   1x8" shelves              $ 14
   Paint, screws             on hand

Desk:
   2 spindles               $10
   1x8" boards            $15
   1x12" board           $ 11
   1x2" apron wood   $ 2
   Mending plates        Can't remember, but they were pennies each
   Pallets                     FREE
   paint, screws, stain  on hand

Jars:
   chalkboard contact paper     $ 8

GRAND TOTAL - PRETTY STINKIN' GOOD!!  (Unless, of course, you count the labor... But I thoroughly enjoyed most of the man-hours it took, so I don't count it!)

Linking up to Kammy's Korner Trash 2 Treasure Tuesday
                      Hunt and Host Laundry and Craft room linky party

Crib Springs Bounce Back

This summer, I officially said goodbye to baby-dom by tearing apart our crib and turning it into a chalkboard easel. But I'm not one to waste a perfectly good industrial looking thingamajig and the springs just looked so fun, that I had to perform another transformation. This one was pretty simple.

I had to remove the hangy on the frame rod thingies first. (Sorry, I have no idea what the technical terms for crib parts are...)

It was stubborn, but so am I. I had to pry out a piece of metal with the hammer tines to make enough room to force out the rod. Then, I just hammered the pried out piece.

Note the ever-present backdrop of Legos

Then, I just had to mount the sucker on the wall and hang a few items with clothespins.

I also have put one of the crib railings to use--sorta. It's leaning sideways in our bathroom as a drying rack. Actually, it's supposed to be a place for Ryan to drape his pants that aren't dirty enough to wash, but are too dirty to fold back up and put away. One look at our closet floor will tell you that it is not being used for its intended purpose, though. Today, Max asked me if it was our ladder. Yep. A ladder to nowhere, apparently...

Check out the whole craft area here.

This craft linked at Kammy's Korner

Pallet desk

Yippy, skippy! I made furniture! By myself! And it was mostly free! I started with four or five sets of pallets, free from the local hardware store. Ryan helped me saw them about in half with a skill saw (but just for the record, I learned how to use the skill saw later and I totally coulda done this step by myself!)

All of the pallets got a heavy sanding and a whitewashing with watered down wall paint. 

This process took several days this summer, and life went on. This is what the nublins did while mama was cutting, cleaning, sanding, and painting. 

Then, I simply stacked the pallets on top of each other for the left half of my desk. 

For the top, I used two 1x8" and a 1x12" board.  I dry brushed them with red craft paint, sanded, then used a mixture of stain and black craft paint to make it look like weathered barn wood. I was thrilled with the results, though the pictures don't do it justice. 

The bottom board is unsanded

I brushed on the stain/paint combo, then wiped it off with a rag. The top board hasn't been wiped yet.

I made a wood "apron" to go around the edge, but only the front and sides. I also used scraps from the apron to help hold the three boards together.

Those metal pieces are called "mending strips" and I thought about them when I looked up in the rafters of our shed. They're used to hold trusses together, but they work for slightly shoddily-crafted desks as well. I used two stair spindles for legs.  

The pallet slots are perfect for all my scrapbook papers, maps, and vintage newspapers. I have stove drip pans for "drawers," but they're pretty flimsy. I'm thinking jumbo cookie sheets would be perfect, but they're not in the budget right at the moment. 

And the desk is an adorable, practical addition to an unused corner of our bedroom, all for under $40! 

Check out the whole craft set-up here.

Linking up to The Shabby Nest

Decoupaged Boxes

My sister was cleaning out an attic somewhere a while back and came across stacks of local newspapers from  the 50s. Who did she think would want to do some dumpster diving vicariously through her? Me, of course. I've got to admit, I've hardly used any since then, but not because I don't love it. On the contrary, I love it so much that no project seems worthy of using it up. Until now. One of my craft nook ideas was covered boxes. A workplace dumpster dive resulted in five perfect boxes. They were large and shallow - almost like board game boxes, but much sturdier. I mixed up a batch of homemade Mod-Podge and got to work. Using the newspaper like wrapping paper, I smeared glue under and then over it. Once it dried, it held very well, and most wrinkles worked themselves out.

I had planned on putting them back together as boxes with lids for storage, but they looked so adorable I wanted more! I stacked all five bases on one pile and all five lids (very slightly larger) on another. I had to fill them up to the brim to keep them from sliding down inside one another, but I had so many odds and ends to store, that was no problem. Now I have twice the impact, twice the storage, and I love it!

Check out the whole craft nook here.

Linked at Kammy's Korner 

Cute, Almost Free Storage

I've been pining for and pinning craft room ideas for a few years now. I'm proud to say I finally have it. It's more of a corner, really, but I'm in love. And I'll show it all in a few days, but first some of the details.

I have a lot of random craft crap. Some of it is cute, some, not so much. So, for about two years I saved oatmeal containers and spaghetti and baby food jars. The oatmeal containers were simple to transform. I just peeled of the label, added new ones of old newspaper, maps, and scrapbook papers. I decided to make the new labels much smaller to let the Kraft paper-looking cardboard show through.

I also cut circles to fit on the top. I may still add chalkboard labels somewhere, because I crammed so much stuff in those tubs and I already forgot what all's in there.

The jars were probably the biggest hold up. I thought I could remove the sticky label glue with hot water and scrubbing, but that didn't work. I finally discovered dipping them in a pot of boiling vinegar. Worked like a charm. My awesome sister-in-law used her Silhouette machine to cut out cute labels in three different sizes. She used chalkboard Contact paper, so the labels peel off and stick on easy peasy. A whole roll was less than $8 and she made a ton of labels for me and still had paper left for herself (she was eyeing her pantry last we talked)

I spray painted the jar lids red. The baby food jars look great, but the large lids ended up pretty streaky. The unlidded jars look ok, but don't want to deal with dust, and I prefer the jars with lids, so it looks like I'll be hoarding pasta lids again.

And then there are these babies:

I scored them for FREE this summer at the grocery store on a double-fortuitous day. The only problem with these bad boys were that they made the spaghetti jar sticky-stuff removal look like child's play. I'm not really sure what finally did the trick, but it must've been a combination of soaking in hot water, drowning in vegetable oil, smearing peanut butter over the label, then scraping with a spatula, steel wool, my fingernails, and a scrubby sponge. The plastic was a little scratched up after the process, but I labeled the back side, and once I loaded them up you could hardly tell.  

Check out all the other storage in my craft "room" here.